OA-W series　Elbow Service Branch for CTG16

For routing wiring at a right angle using with OA-W16 or OA-1

キャプコンOA-Wシリーズ CTG用 Lアングルホルダー

Features

Protection category	Color	Oilproof
IP67	Black	✓

Certificates/Approvals

EU RoHS2

China RoHS

CSA

PSE

・Applications　For routing wiring at a right angle using with cable gland of CTG16 screws

Contents of page

Model/Specifications

Oilproof type

Model	Applicable cable diameter（mm）	Entry hole diameter（mm）	Threads	Mounting plate thickness	Working temperature	Weight*	Q'ty per package
OAL-16	Ø4 - 12	Ø21	CTG16（G1/2）	3 mm or less	-25 to +80℃	13g	20 pcs.

* Weight values are for Black color.

Dimensional drawing

Materials

Cabtyre cable outer diameters

Cabtyre cable outer diameters

Instructions

キャプコンを取付ける。

1. Attach the cable gland CAPCON.

電線を通す。

2. Insert the cable.

キャプコン本体をOAL-16に固定する。キャプコンの締付キャップを締めて固定する。

3.Screw a CAPCON (OA-1, etc.) in the OAL-16 firmly. Then tighten the Dome nut of the CAPCON to fix.

電線が固定されているか確認する。

4. Make sure that the cable is properly secured.

加工穴への取付

For pre-threaded holes on Limit Switches etc.
Remove the locknut and screw the CAPCON into the threaded hole to fix.
Orientation
Supply includes 2 packings of 1.0 mm and 1.5 mm thickness. Use either one or both as required for orientation.

Option

Locknut

Cautions

*Do not step foot or put load on the product. Do not paint the product.
*Do not use this product in oil or water.
*To prevent deterioration, avoid using or storing this product under the following atmospheres.

Outside the range of working humidity and temperature
Water vapor contained or high temperature/humidity air
Acidic, alkaline or organic solvent-containing air (See Technical Data "Chemical resistance"）

For any other special environmental conditions, please contact us before use.

OA-W series　Elbow Service Branch for CTG16