OA-1 series for thin steel conduit

CAD 2D, 3D

For thin steel CTC19 threaded conduit end and exits of switch boxes for thin steel

Certificates/Approvals

EU RoHS2

China RoHS

CSA

PSE

・Applications By using with couplings, this product provides secure clamping to cable exits from thin steel conduit.
For cable exits of outlet boxes, switch boxes, etc.

Model/Specifications

Model	Applicable cable diameter (mm)				Threads	Working temperature	Weight	Q'ty per package
	1st groove	2nd groove	3rd groove	4th groove
OA-1 USU	Ø4 - 5.5	Ø5.5 - 8	Ø8 - 0	Ø10 - 12	CTC19	-25 to +70℃	12g	20 pcs.

・Locknut is not included. Use a CTC19 threaded nut for thin steel conduit if necessary.

Dimensional drawing

Materials

Cabtyre cable outer diameters

Cabtyre cable outer diameters

Instructions

使用する電線径に合わせてキャプコンをカットする。締付ねじは先端の位置にセットする。

1. Cut the CAPCON so as to get the desired diameter. Set the screw on top.

電線管にキャプコンを取付ける。

2. Install CAPCON to the conduit.

電線を通す。

3. Put the cable through.

締付ねじを締め電線を固定する。

4. Tighten the screw to fix the cable.

Use only one cable for one hole.
Tightening torque and tensile strength differ depending on the material of cable coating and its hardness.
Tensile strength drops when outer cable diameter changes due to aging.

Cautions

*Do not step foot or put load on the product. Do not paint the product.
*This product is not waterproof. Use OA-W series where waterproofing is required.
*To prevent deterioration, avoid using or storing this product under the following atmospheres.

Outside the range of working humidity and temperature
Water vapor contained or high temperature/humidity air
Acidic, alkaline or organic solvent-containing air (See Technical Data "Chemical resistance"）

For any other special environmental conditions, please contact us before use.

OA-1 series for thin steel conduit