OA-1 series for small valves

CAD 2D, 3D

For cable exits of DIN（Pg11）standard small valves

Certificates/Approvals

EU RoHS2

China RoHS

CSA

PSE

・Applications　For cable exits of DIN standard (Pg11) electromagnetic valves

Model/Specifications

Model	Applicable cable diameter (mm)			Threads	Working temperature	Weight	Q'ty per package
	1st groove	2nd groove	3rd groove
OA-SD	Ø4 - 5	Ø6 - 8	Ø8 - 10	Pg11	-25 to +70℃	10g	50 pcs.

・Lock nut is not included in this part.

Dimensional drawing

Materials

Cabtyre cable outer diameters

Cabtyre cable outer diameters

Instructions

使用する電線径に合わせてキャプコンをカットする。締付ねじは先端の位置にセットする。

1. Cut the CAPCON so as to get the desired diameter. Set the screw on top.

小型バルブにキャプコンを取付ける。

2. Install the CAPCON to a DIN valve.

電線を通す。

3. Put the cable through.

締付ねじを締め電線を固定する。

4. Tighten the screw to fasten cable securely.

Use only one cable for one hole.
Tightening torque and tensile strength differ depending on the material of cable coating and its hardness.
Tensile strength drops when outer cable diameter changes due to aging.

Cautions

*Do not step foot or put load on the product. Do not paint the product.
*Do not use this product in oil or water.
*To prevent deterioration, avoid using or storing this product under the following atmospheres.

Outside the range of working humidity and temperature
Water vapor contained or high temperature/humidity air
Acidic, alkaline or organic solvent-containing air (See Technical Data "Chemical resistance"）

For any other special environmental conditions, please contact us before use.

OA-1 series for small valves