JB-W series CAPCON integrated, Slim blank type

For versatile application to protect connected wires from water and dust.

Features

Protection category	Color	oilproof	weatherproof
IP67	Black/Beige	✓	✓

Certificates/Approvals

EU RoHS2

China RoHS

CSA

PSE

Model/Specification

Oilproof type Rubber bushing：Black

Model		Working temperature	Applicable cable dia.	Weight *	Q'ty per package
Black	Beige
JB-WSB028070	JB-WSB028070BJ	-25 to +80℃	Ø5 - 7	33g	1 pc.
JB-WSB034070	JB-WSB034070		Ø6 - 9	45g
JB-WSB049070	JB-WSB049070BJ		Ø6 - 9	58g

Weatherproof type　Rubber bushing：Blue

Model		Working temperature	Applicable cable dia.	Weight *	Q'ty per package
Black	Beige
JB-WSB028070E	JB-WSB028070EBJ	-25 to +80℃	Ø5 - 7	33g	1 pc.
JB-WSB034070E	JB-WSB034070EBJ		Ø6 - 9	45g
JB-WSB049070E	JB-WSB049070EBJ		Ø6 - 9	58g

* Weight values are for Black color

Dimensional drawing

Materials

Applicable rubber bushing (optional)

JB-WSB028070／JB-WSB028070E

Model of Rubber bushing	Applicable cable dia.	Q'ty per package
G15M-04/04E	Ø2 - 4	10 pcs.
G15M-05/05E	Ø3 - 5
G15M-302/302E	Ø2.4 - 3 (2 holes)

JB-WSB034070／JB-WSB034070E

Model of Rubber bushing	Applicable cable dia.	Q'ty per package
G13-09B/09BE ※	Ø4 - 6	10 pcs.
G11-11/11E	Ø9 - 11
G11-334/334E	Ø2.2 - 3.3 (4 holes)
G11-402/402E	Ø3 - 4 (2 holes)

※Use it by inserting into each rubber bushing in junction box.

JB-WSB049070／JB-WSB049070E

Model of Rubber bushing	Applicable cable dia.	Q'ty per package
G13-09B/09BE ※	Ø4 - 6	10 pcs.
G11-11/11E	Ø9 - 11
G11-334/334E	Ø2.2 - 3.3 (4 holes)
G11-402/402E	Ø3 - 4 (2 holes)

※Use it by inserting into each rubber bushing in junction box.

Mounting method in case of using center holes

By using seal washers meets IP67 protectivity.*Seal washers are not included.

Mounting method in case of using center holes

Enlarged figure of mounting part

【Recommendation】
Maker:Misumi 　Model:GSWMF4　(2pcs)
Outer diameter Ø 10.2　Thickness 1.3mm　Drilling point diameter：Ø 4 to 4.4

【Cautions】
・Do not use sems screws or flat head screws as M4 fixed screw.
・Select M4 fixed screw considering the thickness of the back side of the housing and that of seal washers.
・Check the performance of seal washers by yourselves if you use other seal washers than other recommendation.

Instructions

For cable inlet, use your connectors as instructed and install them in the box.

【Caution】Be suret to follow the instruction to use connectors,otherwise,waterproof performance might not be secured.

Use only one cable for one hole.
Tightening torque and tensile strength differ depending on the material of cable coating and its hardness.
Tensile strength and waterproof performance drops when outer cable diameter changes due to aging.
Product performance are not guaranteed for cables other than the applicable size or round cables.

Option

Rubber bushing

Plagging bar

Cautions

*Do not step foot or put load on the product. Do not paint the product.
*Do not use this product in oil or water.
*To prevent deterioration, avoid using or storing this product under the following atmospheres.

Outside the range of working temperature
Water vapor contained or high temperature/humidity air
Acidic, alkaline or organic solvent-containing air (See Technical Data "Chemical resistance"）

For any other special environmental conditions, please contact us before use.

For Oilproof Type (Rubber color : black)
Do not expose to direct and continuous sunlight.
Suitable for oily environments.
*For non-oily places, use Weatherproof type.
For Weatherproof Type (Rubber color : blue)Avoid using in oily environments.
For non-oily indoor places, Weatherproof type is recommended.

Wiring precautions

Please pay attention to the following matters in wiring work.
*Avoid direct sunshine in outdoor use.
*To prevent entry of water dropping along the cable, pay attention to the following matters.

Do not place the JOIBOX so as the cable entry is in an upward direction.
When the cable is drawn from higher position, provide a water trap or a horizontal portion.

Wiring precautions

JB-W series CAPCON integrated, Slim blank type