Mounting base CC Holder - Center hole type

CC Holder with centered mounting holes for fitting to aluminum frames Protects connection joints against connection failure and wire breakages by tensile and vibration stresses

Certificates/Approvals

EU RoHS2

China RoHS

CSA

PSE

・Applications　For holding connector joints at assembly machines, conveyors, inspection devices or other machines

Model/Specifications

Model	Length	Fitting method	Color	Working temperature	Weight	Q'ty per package
OL-G4A-80	80mm	Banding band of 5mm wide or smaller	Gray	-40 to +80℃	6g	10 pcs.
OL-G4A-90	90mm	Banding band of 5mm wide or smaller	Gray	-40 to +80℃	7g	10 pcs.

Dimensional drawing

Materials

Mounting pitch

Model	Ａ
OL-G4A-80	50±0.2mm
OL-G4A-90	60±0.2mm

取付ピッチ

Instructions

作業手順

1. Install CC Holder.

・Adjust the position and clamping force of the band to fit the connector configuration.

作業手順

2. Tie the banding band around the object and secure it.

Cautions

・Do not expose this product to external forces. Do not paint.
・To prevent deterioration, avoid using or storing this product under the following atmospheres.

Outside the range of working temperature
Water vapor contained or high temperature/humidity air
Acidic, alkaline or organic solvent-containing air (See Technical Data "Chemical resistance"）

For any other special environmental conditions, please contact us before use.

Mounting base CC Holder - Center hole type