Mounting base RESLOCK

CAD 2D, 3D

Easy to install in positions where hole drilling and tapping are difficult

Certificates/Approvals

EU RoHS2

China RoHS

CSA

PSE

・Applications　For electrical service panels, electrical control panels and a variety of other applications

Model/Specifications

Model	Fitting method	Thread for component mount	Color	Working temperature	Weight	Q'ty per package
OL-A3	by instant glue	M3	Orange	-20 to +70℃	3g	100 pcs.
OL-A4		M3	Yellow		3g	100 pcs.
OL-B4		M4	Black		10g	30 pcs.
OL-B5		M5	Gray		10g	30 pcs.
OL-E3	by screwing with a M4 flat screw	M3	Orange		2g	500 pcs.
OL-E4	by screwing with a M4 flat screw	M4	Yellow		2g	500 pcs.

Dimensional drawing

Materials

Instructions

For type OL-A and OL-B

1. Clean the mounting surface area. No contamination on the surface (dust, oil rust) is allowed.

2. Install RESLOCK.

作業手順

2-1) Place RESLOCK and adjust four molded tips referring to the position lines.
2-2) Drop or inject a drop of glue into glue hole(s).
　　Only one drop (about 0.03 cc) per each glue hole is appropriate.
2-3) Press and hold RESLOCK as required by the glue manufacturer's instructions.

3. Install components.

作業手順

・Adhesives made our from polyethylene, polypropylene, non-active resin and fluorine resin are not permissible to use.
・Low viscosity (2mPa・s) instantaneous chemical adhesive (such as Crazy Glue) is recommended.

For type OL-E

1. Install RESLOCK.

作業手順

This model is for screw fixing only.
Use a flat top screw of M4 size.

Cautions

・To prevent deterioration, avoid using or storing this product under the following atmospheres.

Outside the range of working temperature
Water vapor contained or high temperature/humidity air
Acidic, alkaline or organic solvent-containing air (See Technical Data "Chemical resistance"）

For any other special environmental conditions, please contact us before use.

Mounting base RESLOCK