Mounting base RESLOCK type OL-F

CAD 2D, 3D

Provides clearance height for cable and tube installations

Certificates/Approvals

EU RoHS2

China RoHS

CSA

PSE

・Applications　Ideal where frequent cleaning and rinsing is required such as food processing or cutting machines, or where direct cable/tube attachment is not allowed

Model/Specifications

Model	Cable tie width	fixing screw	Color	Working temperature	Weight	Q'ty per package
OL-F4-30	8.7mm or less	M4×25 (cross-recessed pan head screw)	Black	-25 to +80℃	5g	50 pcs.
OL-F4-50	12.6mm or less	M4×35 (cross-recessed pan head screw)	Black	-25 to +80℃	10g	50 pcs.

Tensile strength by screw tight

Tensile strength vasies depending on the use environment.
（※1） indicates strength at tie rap destruction
（※2) indicates strenght at tightning screw destruction

Dimensional drawing

Materials

Instructions

1. Set RESLOCK. (No matter the direction of top and bottom)

作業手順

(By screw)
Simply tighten a screw through the RESLOCK to the mounting surface.

作業手順

(By cable tie)
Place RESLOCK and secure it with a cable tie to the desired mounting location.

2.Install Components to RESLOCK Block.

作業手順

Place cables or tubes on the depressed part of RESLOCK and loop a cable tie around.
Pull the cable tie to secure the components.

Cautions

・Do not step foot or put load on the product. Do not paint the product.
・To prevent deterioration, avoid using or storing this product under the following atmospheres.

Outside the range of working humidity and temperature
Water vapor contained or high temperature/humidity air
Acidic, alkaline or organic solvent-containing air (See Technical Data "Chemical resistance"）

For any other special environmental conditions, please contact us before use.

Mounting base RESLOCK type OL-F