Condensate-free type

Drain evaporator is integrated.
No troublesome work for drain management.

OCE-FSCJ

Features

Environment of use	Cooling method	Type	Function
Indoor	Thermoelectric	Condensate-free	Display

Certificates/Approvals

EU RoHS

China RoHS

CSA

PSE

Model/Specification

Model		OCE-100FSCJ-A1	OCE-100FSCJ-A2	OCE-200FSCJ-A1	OCE-200FSCJ-A2
Type of mounting		Lateral mounting
Cooling method		Fan-cooled Cool Air Agitation
Drain evaporation method		Evaporation at low temperature by heater
Cooling capacity*1		90/100W		180/200W
Evaporation capacity*2		50ml/h（at the temperature+30℃ and 80％RH humidity）
Rated voltage（50/60Hz）		Single phase 100VAC	Single phase 200VAC	Single phase 100VAC	Single phase 200VAC
Current consumption*3	Rated	2.8/2.7A	1.4/1.3A	4.6/4.5A	2.3/2.2A
	Max.	3.0/2.9A	1.5/1.4A	4.9/4.8A	2.6/2.4A
Starting current		8.5A	4.5A	13.0A	9.0A
Power consumption*3	Rated	280/270W	280/270W	450/440W	450/440W
	Max.	300/290W	300/290W	495/485W	495/485W
Working temperature		0 to＋50℃
Working humidity		80％RH or less, free from condensation
Noise		52dB(A)		56dB(A)
Display		Innter temperature/Alarm code/Operation lamp/Alarm lamp
Temperature setting range		+10 to +50℃（Initial setting +30℃）
Functions		Off-temperature alarm, Maintenance reminder, Detection of fan shutdown on cooling side, Detection of temperature sensor disconnection, Detection of abnormal temperature at power supply, Overheat protection for evaporation unit：Thermal fuse (fusing at 75℃,replacing), Detection of tank over flow
External output		240V 1.5A
Applicable standard	Environment	RoHS
Operating method		ON/OFF control DIF：3℃
Operation control for evaporation		Thermostat-controlled ON/OFF
Color		Beige (10GY9/1 equivalent)
Dimensions（mm）*4		W265×H335×D177		W265×H475×D177
Weight		7.5kg		11.0kg

*1　Nominal cooling capacity with +30℃ in working temperature.
*2　The value shows the performance under the given conditions and may be lessened depending on the environment of usage.
*3　Nominal values at 30℃ temperature both inside and outside are indicated in "Rated" and nominal values at 10℃ inside and 30℃ outside temperatures are indicated in "Max". These values are based on condition that both of cooling and dehumidifying operations are executed.
*4　Projections are excluded.

Supply voltage should be within the fluctuation range of 10% from the rated voltage.

Product lineup

Contents of page

OCE-100FSCJ-A1/A2

OCE-100FSCJ

Cooling capacity

90/100W

A complete set of supply

BOXCOOL : 1 unit　Fixing bolt : 4 pcs.　SP washer : 4 pcs.　Plain washer : 4 pcs.　
Nut : 4 pcs. Terminal board : 1 pc.　Instruction manual : 1 copy
* Drain hose is not included.

Maintenance parts

Suction port filter	Evaporator suction port filter
BCF-S1 (2 pcs/set)	BCF-S3 (1 pc.)

Performance chart

Dimensional drawing

Mounting cutout

OCE-200FSCJ-A1/A2

OCE-200FSCJ

Cooling capacity

180/200W

A complete set of supply

BOXCOOL : 1 unit　Fixing bolt : 4 pcs.　SP washer : 4 pcs.　Plain washer : 4 pcs.　
Nut : 4 pcs. Terminal board : 1 pc.　Instruction manual : 1 copy
* Drain hose is not included.

Maintenance parts

Suction port filter	Evaporator suction port filter
BCF-S2 (2 pcs/set)	BCF-S3 (1 pc.)

能力グラフ

外形寸法図

パネルカット図

Cautions

・Do not use this product in a place where flammable or corrosive gasses, or any matters that can destroy insulation generate or permeate.
・The site of use should be free from vibration and impact.
・Electrical works required for installation of this product should be done only by professionals or qualified personnel.
・Install this product perpendicularly within a tolerance of 1 degree.
・This product cannot be used so as to invert cooling and heating operations.
・Make sure that the packaging is not damaged on delivery. Any packaging damage can lead to breakdown of the product. Please contact us immediately if any damage is found.
・This product is for indoor use only. For outdoor use, please see BOXCOOL outdoor types OCE-100BEC-AW and OCE-200BEC-AW.

Condensate-free type