Outdoor use Salt damage resistant type

Slash energy consumption by highly efficient cooling
Outdoor use, salt damage resistant thermoelectric cooler

OCE-BEC

Features

Environment of use	Cooling method	Function		Specifications
Outdoor	Thermoelectric	Energy saving mode	Display	Salt damage resistant	Stainless steel-made housing(partially)	Wide range of supply voltage

Certificates/Approvals

EU RoHS

China RoHS

CSA

PSE

Model/Specifications

Model		OCE-100BEC-AW	OCE-200BEC-AW
Type of mounting		Lateral mounting
Cooling method		Fan-cooled Cool Air Agitation type
Cooling capacity*1		100W	210W
Heating capacity*2		Approx. 50W	Approx. 100W
Rated voltage (50/60Hz)		Single phase, 100-240VAC
Current consumption※3	Rated	0.8A (at 100VAC) 0.4A (at 200VAC)	1.6A (at 100VAC) 0.8A (at 200VAC)
	Max.	1.0A (at 100VAC) 0.5A (at 200VAC)	2.0A (at 100VAC) 1.0A (at 200VAC)
Starting current		4.0A (at 100VAC) 8.5A (at 200VAC)	6.0A (at 100VAC) 12.5A (at 200VAC)
Power consumption※3	Rated	74W	150W
	Max.	97W	192W
Working temperature*4		Inside : -10 to ＋50℃　Outside : -20 to +50℃
Working humidity*4		Inside : Less than 85％RH, free from condensation　Outside : Less than 95％RH
Noise		50dB(A)	53dB(A)
Setting range for cooling operation start temperature*4		+25 to +45℃ (Default +35℃ ON / +30℃ OFF)
Heating operation start temperature		+5℃ ON/+10℃ OFF (Fixed)
Temperature and humidicty conditions for evaporation*5		+35℃ 70％RH or less
Display		Internal temperature, Alarm code／Operation lamp, Alarm lamp
Function		High internal temperature, Maintenance reminder, Fan stop error on cooling and heat dissipation sides, Temperature sensor disconnection, Off-temperature at power supply, Thermoelectic module failure, Power supply failure
External output		Alarm output　contact 1C　250VAC, 30VDC 3A
Protection rating*6		IP55　(Category 2)
Conformity to standards	Environment	RoHS
Housing material/furface finish/color		SUS304/Powder coating/Beige (5Y7/1 equivalent)
Louver material/color		Polycarbonate/Beige (5Y7/1 equivalent)
Dimensions (mm)*7		W270×H340×D184	W290×H490×D184
Weight		8.9kg	14.0kg

*1　Nominal value when both internal and external temperatures are +35℃
*2　Nominal value when both internal and external temperatures are +5℃
*3　Nominal values at 35℃ temperature both inside and outside are indicated in "Rated" and nominal values at 0℃ both inside and outside are indicated in "Max".
*4　Use only within the specified temperature and humidity range.
*5　Depending on use conditions, condensation water may drip from the bottom of this product outside the enclosure.
*6　This indicates the value for an enclosure to which a BOXCOOL is mounted, provided that it has equivalent or more protectivity, and not for a BOXCOOL itself. The IP capability is subject to aged deterioration.
*7　Excluding louvers and guards

Supply voltage should be within fluctuation range of 10% from the rated voltage.

Product lineup

Contents of page

OCE-100BEC-AW

OCE-100BEC

Cooling capacity

100W

A complete set of supply

BOXCOOL : 1 unit　Louver (with screws) : 1 pc.　SP washer : 6 pcs.　Plain washer: 6 pcs.　Nut : 6 pcs.
Terminal board : 1 pc.　Instruction manual : 1 copy
* Drain hose is not included.

Maintenance parts

Internal fan	External fan
FM-100BEC-IN	FM-100BEC-OUT

Performance chart

Dimensional drawing

Mounting cutout

OCE-200BEC-AW

OCE-200BEC

Cooling capacity

210W

A complete set of supply

BOXCOOL : 1 unit　Louver (with screws) : 2 pcs.　SP washer : 6 pcs.　
Plain washer: 6 pcs.　Nut : 6 pcs.　Terminal board : 1 pc.　Instruction manual : 1 copy
* Drain hose is not included.

Maintenance parts

Internal fan	External fan
FM-200BEC-IN	FM-200BEC-OUT

Performance chart

能力グラフ

Dimensional drawing

Mounting cutout

パネルカット図

Cautions

This product is is a thermoelectric cooler for outdoor use which has been designed to satisfy the requirements of “Salt Damage-Resistant Specifications” in JRA9002-1991 “Test standard for Salt Damage-Resistant Air Conditioning Equipment” having a housing with enhanced corrosion-resistant materials and paintings as well as a water and dust-proof power supply. This product is conforming to JRA9002 mentioned above but it does not mean use in all kinds of salt damage environment is guaranteed.
Please also see "Technical data : BOXCOOL/Salt damage resistance". For more details, please contact us.
・Do not use this product in a place where flammable or corrosive gasses, or any matters that can destroy insulation generate or permeate.
・The site of use should be free from vibration and impact.
・Electrical works required for installation of this product should be done only by professionals or qualified personnel.
・Install this product perpendicularly within a tolerance of 1 degree.
・Make sure that the packaging is not damaged on delivery. Any packaging damage can lead to breakdown of the product. Please contact us immediately if any damage is found.
・Please consult us concerning a use in a salt damage area or heavy salt damage area.
・Do not use this product in a place where salt-rich air generates or permeates or a place where it is directly exposed to water that contains high proportion of salt.
・Working temperature should be within the range of -10 to +50℃ on internal side and -20 to +50℃ on external side. Working humidity should not exceed 85%RH on internal side and 95%RH on external side being free from condensation.

Outdoor use Salt damage resistant type