Ultrasonic atomization type

Atomizes drain water by means of ultrasonic vibrator

OCJ-M

Features

Environment of use	Type of mounting	Processing method	Specifications
Indoor	Lateral, Recessed or Stationary	Ultrasonic atomization	Wide range of supply voltages

Certificates/Approvals

EU RoHS

EU RoHS2

China RoHS

CE

UL

CSA

PSE

Model/Specifications

Model		OCJ-M030-AW	OCJ-M060-AW
Processing method		Ultrasonic atomization
Type of mounting		Lateral, Recessed or Stationary mounting
Processing capacity *1		320ml/h	650ml/h
Rated voltage		Single phase, 100-240VAC
Stand-by time power consumption *2		5W
Operating time power consumption *2		44W	82W
Working temperature		+10 to ＋50℃
Working humidity		Max. 85％, free from condensation
Atomization operation		Float switch-opearted ON/OFF at threshold amount
Protective function		Overflow detection
Error output		1 contact output for overflow No voltage a contact 250VAC 3A Resistance load
Noise		52dB(A)
Secondary drain pipe *3		Ø13
Conformity to standards	Environment	RoHS
Dimensions (mm)*4		W300×H190×D150	W350×H200×D200
Weight *5		4.8kg	6.5kg

*1 Drainage processing capability at 30℃ambient temp. and 60％RH
*2 Maximum value within the working temp. range
*3 This port is plugged when shipped.
*4 Excluding projections
*5 Dry weight

Supply voltage should be within the specified range with fluctuation not exceeding ±10%.

Product lineup

OCJ-M030-AW

Processing capacity

320ml/h

A complete set of supply

EVAPRO : 1 unit　Packing : 1 pc.　Fixing bolt : 4 pcs.　Washer : 4 pcs.
Spring washer : 4 pcs. Nut : 4 pcs. Instruction manual : 1 copy

Maintenance parts

Filter
EPF-S3	1 pc.

Performance chart

Dimensional drawing

Mounting cutout

OCJ-M060-AW

Processing capacity

650ml/h

A complete set of supply

EVAPRO : 1 unit　Packing : 1 pc.　Fixing bolt : 4 pcs.　Washer : 4 pcs.
Spring washer : 4 pcs. Nut : 4 pcs. Instruction manual : 1 copy

Maintenance parts

Filter
EPF-S3	1 pc.

Performance chart

Dimensional drawing

Mounting cutout

Option

Stationary mount bracket

・For OCJ-M030-AW : OCJ-AN1
・Doe OCJ-M060-AW : OCJ-AN2

　Mounting plate : 2 pcs.　
　Fixing screw : 4 pcs.

Supplementary drain receiver

・For OCJ-M030-AW : OCJ-WPU1
・For OCJ-M060-AW : OCJ-WPU2

　EVAPRO : 1 unit　Tank : 1 pc.
　Fixing screw : 4 pcs.

Cautions

・This product is designed for processing drain water discharged from enclosure coolers. Do not use it for any other purposes.
・Locate EVAPRO at least 200 mm away from adjacent components or walls to keep smooth air circulation. Failure to this will lead to performance decline or adverse effect on other components.
・Do not use this product in a place where oil fumes, flammable/corrosive gasses or any matters that can destroy insulation generate or permeate.
・The site of use should be free from vibration and impact.
・Electrical works required for installation of this product should be done only by professionals or qualified personnel.
・Do not disassemble or tamper.
・Make sure that the packaging is not damaged on delivery. Any packaging damage can lead to breakdown of the product. Please contact us immediately if any damage is found.

Ultrasonic atomization type