Self-charging oil skimmer

*1 Based on our standard. The content rate is measured in accordance with JIS residue on evaporation test method.
*2 Charging time may differ depending on the battery condition.
*3 Operation time may be shortened depending on the battery condition.
*4 This is the expected calculation value and not a guaranteed value by us. Value varies depending on working environment.

1. Pour coolant or cleaning solution into the Separating Tank before using Jet Skimmer.
2. Oil and coolant collected by Jet Skimmer flows into No.1 tank after floating oil and sludge are removed through the Mesh Tray.
3. Oil having lower specific gravity floats to the surface and goes out through the oil outlet.
4. Other liquid flows beneath the partition plate, then moves to No.2 tank and flows through the pipe to be returned into the coolant tank from the water return inlet.

*Separation Tank and Gauge Tray are option. See “Option" .

①When operated JET SKIMMER for one hour after agitating coolant in the tank (assuming machine is in operation)
②When operated JET SKIMMER for one hour without agitating coolant in the tank (assuming thirty minutes after machine stoppage)

Testing conditions
Size of coolant tank W800 × H500 × D800(mm) : 150L
Cutting water: 100L(coolant solution diluted 25 times, containing floating oil of 4L)
*Concentration test method is according to JIS evaporation residue test method.

For treatment of an used battery of this product, please observe all applicable lows and regulations of your region so it can be properly recycled.
In Japanese law, the sealed lead acid battery is listed in the "Specified Resources-Recycled Product" and the used batteries needs to be properly treated and recycled by specialized companies.
Outside Japan as well, please check your local regulations on disposal or recycling of batteries and make a proper treatment plan.

 

・Liquid temperature in the tank should not exceed +70℃.
・In case of long-term storage, remove the battery from the control box without fail. For storage of both the JET SKIMMER and the removed battery, select a cool and dry place.
　　Recommended storage temperature : 15 to 25℃
　　Recommended storage humidity : 30 to 60%RH
・This product cannot be used in an environment in which corrosive or flammable gasses, oil smokes or dust which affect insulation generates or permeate.
・This product is for indoor use only.
・The site of use should be free from vibration and impact.
・Electrical works required for mounting the product should be done by professionals or qualified personnel.
・Make sure that the packaging is not damaged on delivery. Damages during transportation may lead to product failure. In case any damage is found, contact your supplier immediately.