Junction box for sensor cables routed where space is limited.
Protection category | Color | Rated voltage | Rated current | Oilproof | Weatherproof | Number of terminals |
IP67 | Black/Beige | 300V | 15A | ✓ | ✓ | 3P/4P/6P |
EU RoHS2 | China RoHS | CE | UL | CSA | PSE |
Model | Rated voltage | Nominal section area of cable | Number of terminals | Terminal screw | Weight (*1) |
Q'ty per package |
|
Black | Beige | ||||||
JB-WST303 | JB-WST303BJ | AC/DC 300V 15A |
1.25mm2 or less |
3P | M3×8 Free terminal screw |
46g | 1 pc. |
JB-WST304 | JB-WST304BJ | 4P | 63g | ||||
JB-WST306 | JB-WST306BJ | 6P | 85g |
Model | Rated voltage | Nominal section area of cable | Number of terminals | Screw terminal | Weight (*1) |
Q'ty per package | |
Black | Beige | ||||||
JB-WST303E | JB-WST303EBJ | AC/DC 300V 15A |
1.25mm2 or less |
3P | M3×8 Free terminal screw |
46g | 1 pc. |
JB-WST304E | JB-WST304EBJ | 4P | 63g | ||||
JB-WST306E | JB-WST306EBJ | 6P | 85g |
Model of Rubber bushing | Applicable cable diameter(mm) | Q'ty |
G15M-05/05E | Ø3 to 5 | 1 |
G15M-07/07E | Ø5 to 7 | 1 |
Model of Rubber bushing | Applicable cable diameter(mm) | Q'ty |
G15M-04/04E | Ø2 to 4 | 1 |
G15M-302/302E | Ø2.4 to 3(2 holes) | 1 |
Model of Rubber bushing | Applicable cable diameter(mm) | Q'ty |
G11-09A/09AE | Ø6 to 9 | 1 |
G11-402/402E | Ø3 to 4(2 holes) | 1 |
Model of Rubber bushing | Applicable cable diameter(mm) | Q'ty |
G13-09B/09BE(※1) | Ø4 to 6(※2) | 1 |
G11-09A/09AE | Ø6 to 9 | 1 |
Model of Rubber bushing | Applicable cable diameter(mm) | Q'ty |
G11-11/11E | Ø9 to 11 | 1 |
G11-334/334E | Ø2.2 to 3.3(4 holes) | 1 |
Model of Rubber bushing | Applicable cable diameter(mm) | Q'ty |
G13-09B/09BE(*1) | Ø4 to 6(*2) | 1 |
G11-09A/09AE | Ø6 to 9 | 1 |
1.Insert cables from the openings on each end (through the CAPCON) and crimp the fork terminals.
【Cautions】Make sure to use an insulated sleeve with a fork terminal. Failure to this may cause a short circuit due to insufficient insulation distance.
2.Install the fork terminals in the JOIBOX terminal strip and tighten them with the screws provided.
【Cautions】The following matters should be strictly observed. Faulty connections may result in heating or burning.
・Make sure the screws are tightly secured. Check and retighten if necessary.
・Never make connections as shown in the above.
3.Tighten the (CAPCON) dome nut to fasten cable.