CAPCON Cable gland and terminal board are combined in one. Compact and fast! Remarkably improves your working efficiency.
Protection category | Color | Rated voltage | Rated current | Oilproof | Weatherproof | Number of terminals |
IP67 | Black/Light gray | 600V | 20A | ✓ | ✓ | 4P |
EU RoHS2 | China RoHS | CE | UL | CSA | PSE |
Model | Rated voltage | Working temperature | Nominal section area of cable | Number of terminals | Weight (*1) |
Q'ty per package | |
Black | Light gray | ||||||
JB-W44 | JB-W44C1 | AC/DC 600V 20A |
-25 to +80℃ | 2.0mm2 or less |
4P | 95g | 1 pc. |
Model | Rated voltage | Working temperature | Nominal section area of cable | Number of terminals | Weight (*1) |
Q'ty per package | |
Black | Light gray | ||||||
JB-W44E | - | AC/DC 600V 20A |
-25 to +80℃ | 2.0mm2 or less |
4P | 95g | 1 pc. |
Model of rubber bushing | Applicable cable diameter(mm) | Q'ty |
G13-13/13E | Ø11 to13 | 1 |
G13-602/602E | Ø5 to 6(2 holes) | 1 |
Model of rubber bushing | Applicable cable diameter(mm) | Q'ty |
G13-09/09E | Rubber bushing A+B Ø3 to 6 Rubber bushing A only Ø6 to 9 |
1 |
G13-11/11E | Ø8.5 to 11.5 | 1 |
G13-404/404E | Ø3 to 4(4 holes) | 1 |
Model of plugging bar | Specification | Q'ty |
BB-40S | For G13-404/404E | 2 |
1.Insert cables from the openings on each end (through the CAPCON) and crimp the fork terminals.
2.Insert a ring terminal into the terminal strip until it locks in to place.(*) Pull back on the terminal to ensure it has caught in the initial locking position.
*Note:Secure Lock Position
Insert the ring terminal until it clicks.The opposing terminal will make no sound when inserted.
【Cautions】Confirm the terminals are in locked position.
<For the first terminal>Pull the cable to make sure that the ring terminal is held in position.
<For the second terminal>Verify that the neck of the ring terminal is evenly held down by the terminal strip.
3.Tighten the provided terminal screws using a screw driver.
4.Tighten the dome nut to fasten the cable.
5.Tighten the lid screws until they click, signifying the optimum tension.
【Cautions】Avoid tightening over the click position.Failure to this may damage the screws and lead to degrade the water-tightness.
【Diassembly】Loosen the terminal screw and remove the cable in two steps. ①1.Push the ring terminal down.②2.Pull the ring terminal out while holding the terminal down.