JB-W series Female threaded, Terminal block mounter integrated

Female threaded entries allow a wide variety of connector selection to meet your wiring requirements. Terminal board is not pre-mounted.

Features

Protection category	Color	Oilproof	Weatherproof
IP67	Black/Light gray/Beige	✓	✓

Certificates/Approvals

EU RoHS2

China RoHS

CSA

PSE

Model/Specification

Oilproof type

Model			Working temperature	Weight（*1）	Q'ty per package
Black	Light gray	Beige
JB-WB2209	JB-WB2209C1	JB-WB2209BJ	-25 to +80℃	127g	1 pc.

Weatherproof type

Model			Working temperature	Weight（*1）	Q'ty per package
Black	Light gray	Beige
JB-WB2209E	-	JB-WB2209EBJ	-25 to +80℃	127g	1 pc.

*1 Weight values are for Black color.

Dimensional drawing

Materials

Maximum dimensions of terminal board

*The fixing screws for mounting a terminal board should be within the following range.
Screw length=Thickness of the flange of the terminal board +4 to 7mm
*Some terminal boards may not be attachable due to their configurations.

Applicable CAPCON

OA-W series Wide range type

Model	Applicable cable diameter	Numbers of cavity
OA-WW22-11/20（E）	Ø11 to 20	1

OA-W series Standard type

Model	Applicable cable diameter	Numbers of cavity
OA-W2213/2213E	Ø9 to 13	1
OA-W2216/2216E	Ø13 to 16
OA-W2219/2219E	Ø15 to 19

OA-W series Multiple type

Model	Applicable cable diameter	Numbers of cavity
OA-W22-604/604E	Ø5 to 6	4
OA-W22-704/704E	Ø6 to 7	4

Clamp or Connector selection parameter

Item	Parameter
Connector diameter	Ø42mm or less
Thread	CTG22

Instructions

【Mounting to a DIN-rail】 Mount the DIN rail of a terminal board to JOIBOX . Maximum allowable length of A = 53 mm

【Mounting to a DIN-rail】
Mount the DIN rail of a terminal board to JOIBOX . Maximum allowable length of A = 53 mm
*Some type of terminal board configuration may not applicable to this product.

【Mounting to a terminal block】
Screw a terminal block to the fixation nuts of JOIBOX. Maximum allowable pitch of B=Max.48mm

For securing a terminal block, use the screws within the following range. （T+4mm）≦C≦（T+7mm）

For securing a terminal block, use the screws within the following range.
（T+4mm）≦C≦（T+7mm）

Cable entry port
Attach an appropriate cable gland or a connector at the port in accordance with the manufacturer’s instruction.
【Caution】Use the cable gland or the connector properly in order to assure its intended liquid tightness.

Option

Blank cap nut

Conversion adaptor

Cautions

*Do not step foot or put load on the product. Do not paint the product.
*Do not use this product in oil or water.
*To prevent deterioration, avoid using or storing this product under the following atmospheres.

Outside the range of working temperature
Water vapor contained or high temperature/humidity air
Acidic, alkaline or organic solvent-containing air (See Technical Data "Chemical resistance"）

For any other special environmental conditions, please contact us before use.

For Oilproof Type (Rubber color : black)
Do not expose to direct and continuous sunlight.
Suitable for oily environments.
*For non-oily places, use Weatherproof type.
For Weatherproof Type (Rubber color : blue)
Avoid using in oily environments.
For non-oily indoor places. Weatherproof type is recommended.

Wiring precautions

Please pay attention to the following matters in wiring work.

*Avoid direct sunshine in outdoor use.
*To prevent entry of water dropping along the cable, pay attention to the following matters.

Do not place the JOIBOX so as the cable entry is in an upward direction.
When the cable is drawn from higher position, provide a water trap or a horizontal portion.

Wiring precautions

JB-W series Female threaded, Terminal block mounter integrated