http://www.spinachbase.org/https://duniapermainan.id/https://borobudur.site/https://beritamakan.xyz/http://lesfergusonjr.com/https://www.drafthorsejournal.net/https://ajudanze.us/https://soykb.org/https://www.laoplazahotel.com/https://bidpropamkaltara.com/https://www.inmercociudades.org/https://hanomantoto.vip/https://togeljackpot.bio/https://wsf2024nepal.org/https://www.ha-software.com/https://www.demo.mimikakab.go.id/https://alapp.selumakab.go.id/main/https://www.aveironet.com/https://motocofservice.com/https://missglobalnigeria.com/https://gilchristfliegen.com/https://cosmictoto.id/https://alapp.selumakab.go.id/log/https://borobudurbet-com.net/https://auroratotosatu.net/https://auroratoto-2.com/https://totocosmic.net/
Crystal clear push-on insulation cap for indoor wiring TOMEI CAP

Crystal clear push-on insulation cap for indoor wiring TOMEI CAP

Crystal clear push-on insulation cap for indoor wiring TOMEI CAP

Crystal clear push-on insulation cap for indoor wiring TOMEI CAP

No manual taping, ever! Simply insert ring sleeve terminals and it locks automatically through our unique internal design.

Certificates/Approvals

EU RoHS2 China RoHS CE UL CSA PSE
This product is conforming to or listed in the following Japanese standards.
・Listed as Common Electrical Facility Wiring Specifications by MLIT (Ministry of Land, Infrastructure and Transport)
・Listed as Common Installation Specifications by HUDC (Housing and Urban Development Corporation)
・Type approval ("T" Marking) by Electrical Appliances Regulations by METI
・Technical Standards of Electric Installation by METI
 

 

Model/Specifications

Model Applicable sleeve Color Rated voltage Working temperature Weight Q'ty per package
OP-1 Small stripped crimp ring sleeve
for JIS copper wires
Red
600V AC/DC
-20 to +80℃ 2g 100 pcs.
OP-2 Medium/Large stripped crimp ring sleeves
for JIS copper wires
Blue

 

Dimensional drawing

外形寸法図

 

Materials

材質

 

Instructions

圧着作業 芯線の端はスリーブの端から1~2mmであること。

1. Crimp the wire by leaving 1 to 2 mm of extension out from E sleeve edge.

芯線にキャップを被せる。

2. Place TOMEI Cap over the core wire.

「パチン」と音がするまでキャップを被せる。

3. Push TOMEI Cap until it makes a clicking sound.

キャップをひねらずまっすぐに倒しこみ、ボックスへ納める。

4. Bend TOMEI Cap straight and store it into the box. No twisting is allowed.

Cautions

  • This product is for ring sleeves only
  • Crimping work should be done using the specified tools
  • Faulty crimping as shown in the right should be strictly avoided
  • Do not use OP-2 for small ring sleeves
  • Make sure that wires are securely fixed after installation
 Exclusively for indoor wiring boxes use.

注意

 

Cautions

・Use this product in indoor joint boxes only.
・Read the instruction manual carefully before use for proper usage.
・Be sure to direct the insertion port downward or make necessary arrangement to keep foreign matters away from entering. Accumulated dust can be a cause of burnout or other damages.
・To prevent deterioration, avoid using or storing this product under the following atmospheres.
  1. Highly humid air exceeding 90%RH
  2. Strong alkaline (such as anmmonia), aromatic compound and halogenation hydrocarbon (thinner, toluene, benzene, chloroform etc.) atmospheres
  3. Oily or salty air
  4. Places where the product is exposed to water or dust
For any other special environmental conditions, please contact us before use.


Gallery

Crystal clear push-on insulation cap for indoor wiring TOMEI CAP