Non-fluorocarbon Series Condensate-free type

*1 Nominal value when both of internal and external temperatures are +35℃.
*2 Nominal values at 35 and 40％RH and inside condtion of 35℃ without drainage and “Max.” values are for outside condition of 50,40%RH and inside condtion of 35℃ without drainage.
*3 Nominal values with maximum condensate generation when temperatures and humidities both inside and outside the enclosure are 35℃, 85%RH.
*4 Use only within the specified temperature range.
*5 Except drain pipe
*6 By IPCC 5th Report 2013

• Please contact us for other supply voltages than 200VAC.（Referenece：Transformer for COOL CABI (Separate placement)）
• Supply voltage should be within the fluctuation range of 10% from the rated voltage.

・Locate the unit so as to assure good ventilation and distance of at least 200mm from the walls or other units.
・Failure to this may degrade cooling performance of the unit and cause condensation.
・Setting temperature should be basically at 35℃. Avoid setting at an unnecessarily low value.
・Electrical connection should be made via appropriate circuit breakers.
・Do not use this product in the following places.
　--A place where corrosive or flammable gases exist in the air, or where the insulation destruction occurs.
　--A place where the product may be subject to shock or vibration.
・Make sure that electrical wiring work is done by qualified electrician.
・Check for damage on packaging when the product is delivered.
・Any packaging damage may be a cause of malfunction. Make sure that the packaging is not damaged on delivery and contact your supplier.